Product ID:ACID CORED SOLDER WIRES,INCL 40/60ACID CORE
MSDS Date:06/15/1989
FSC:6850
NIIN:00N011887
MSDS Number: BJMSN

FEDERATED-FRY METALS

6TH AVENUE & 41ST STREET
ALTOONA, PA 16602
US

Emergency Phone: 800-424-9300(CHEMTREC);814-946-1611

Info Phone: 814-946-1611 (DON PORTER)

Cage: 65172

FRY TECHNOLOGY DIV OF COOKSON AMERICA INC

ALTOONA, PA 16602 US

Telephone: 814-946-1611

Cage: 65172

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

INDIUM

CAS: 7440-74-6

RTECS: NL1050000

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ZINC CHLORIDE (SARA III)

CAS: 7646-85-7

RTECS: ZH1400000

Fraction By Weight: 1-4%

OSHA PEL 1 MG/M3/2 STEL

ACGIH TLV: 1 MG/M3/2STEL FUME93

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

BISMUTH

CAS: 7440-69-9

RTECS: EB2600000

OSHA PEL N/K

ACGIH TLV: N/K

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 0-1%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:MOLTEN SOLDER & FLUX BURNS SKIN,FLUX
MAY CAUSE SKIN ULCERATION.LEAD IS TOXIC BY INGEST;CAUSES INTERNAL
INJURY & AFFECTS KIDNEYS & LIVER.EXCESS INHAL OF FLUX FUMES MAY
LEAD TO INTERNAL ULCERATION OR BU RNS.PRLNG LEAD OVEREXP MAY DMG
CNS & KIDNEYS.LEAD KNOWN TO CAUSE REPRO DISORDERS
(FEMALE,MALE,DEVEL) (CAL PROP 65,1987).
Explanation of Carcinogenicity:INORGANIC LEAD & LEAD
COMPOUNDS:INADEQUATE EVID FOR CARCIN IN HUMANS;SUFFICIENT EVID FOR
CARCIN IN ANIMALS (IARC,1987).
Effects of Overexposure:EYES:FLUX FUMES-SEVERE IRRITANT.SKIN:MOLTEN
SOLDER & FLUX-BURNS.FLUX-ULCERATION.INORG TIN
CMPDS-IRRITANTS.ABSORPTION NOT
KNOWN.INGEST:UNLIKELY.LEAD-TOXIC,CAUSES INTERNAL INJURY,AFFECTS
KIDNEYS & LIVER .INHAL:FLUX FUMES IRRITATE MUCOSAL SURFACES,LEADS
TO INTERNAL ULCERATION/BURNS.PRLNG LEAD OVEREXP DMG CNS,(SEE SUPP)
Medical Cond Aggravated by Exposure:N/K

First Aid:EYES:REMOVE FROM EXPOSURE,FLUSH EYES WITH WATER FOR AT LEAST
15 MINUTES.GET MEDICAL ATTENTION.SKIN:FOR BURNS,COOL WITH COLD
WATER AND GET MEDICAL ATTENTION.INGESTION:GET MEDICAL ATTENTION
IMMEDIATELY. INHALATION:REMOVE TO FRESH AIR.IF BREATHING IS
DIFFICULT,ADMINISTER OXYGEN AND GET MEDICAL ATTENTION.

Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES,LEAD
EMITS TOXIC FUMES.HAZARDOUS DECOMPOSITION PRODUCTS:FUMES EMITTED IN
SOLDERING OPERATION MAY CONTAIN ZINC CHLORIDE.

Spill Release Procedures:IF MOLTEN,ALLOW TO COOL AND SOLIDIFY THEN
SCRAPE UP.
Neutralizing Agent:N/K

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS.KEEP
OUT OF REACH OF CHILDREN.FOR INDUSTRIAL USE ONLY.DO NOT TAKE
INTERNALLY.
Other Precautions:N/K

Respiratory Protection:REQUIRED IF TLV'S ARE NOT BEING MAINTAINED.USE
FUME MASKS.
Ventilation:REQUIRED TO PREVENT OPERATORS BREATHING FUMES DURING
SOLDERING.
Protective Gloves:NOT USUALLY NECESSARY.
Eye Protection:FACESHIELD & GOGGLES DURING SOLDERING.
Other Protective Equipment:N/K
Work Hygienic Practices:NO FOOD,DRINK OR TOBACCO ALLOWED WHERE CORE
SOLDER USED.WASH HANDS THORO AFTER HANDLING CORE SOLDER,BEFORE (SEE
SUPP)
Supplemental Safety and Health
SPEC GRAV:DEPENDS ON ALLOY & FLUX.MP:DEPENDS ON ALLOY COMPOSITION.ENTRY
RTE:INHAL/SKIN/INGEST .HLTH HAZ:KIDNEYS.LEAD OVEREXP UNLIKELY AS
SIGNIFICANT FUME NOT PRODUCED BELOW 700F,371C,NO SYSTEMIC EFT
REPORTED FROM INDUS EXPO.HYGIENE
PRAC:EATING,DRINKING,SMOKING,APPLYING COSMETICS.

Melt/Freeze Pt:M.P/F.P Text:SEE SUPP
Decomp Temp:Decomp Text:N/K
Spec Gravity:SEE SUPP DATA
Solubility in Water:FLUX IS SOLUBLE
Appearance and Odor:SILVER-GRAY WIRE.ODOR IS NIL.

Stability Indicator/Materials to Avoid:YES
OXIDIZERS,STRONG ACIDS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:FUMES EMITTED IN A SOLDERING OPERATION
MAY CONTAIN ZINC CHLORIDE.WHEN HEATED TO HIGH TEMP,LEAD EMITS TOXIC
FUMES.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .RETURN FOR REPROCESSING OF
METAL.PRODUCT CONTAINS CHEMICAL SUBJECT TO SARA TITLE III SECTION
313.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.